PRIMA LED EX

TREVOS

PRIMA LED EX

  • Slide title

    Write your caption here
    Button

  • Slide title

    Write your caption here
    Button

  • Slide title

    Write your caption here
    Button

  • Slide title

    Write your caption here
    Button

  • Slide title

    Write your caption here
    Button

  • Slide title

    Write your caption here
    Button
DOWNLOAD DATASHEET DOWNLOAD EU DATASHEET

Plastic industrial LED light fitting intended for environment with risk of explosion group II, category 3 (zone 2, 22), with diffuser made of transparent polycarbonate.


The light fitting is suitable for the environment with a danger of explosion of gases, dust and combustible fumes. The light fittings meet the requirements of Government Decree 116/2016 Coll. and European Community Directive No.2014/34/EU. 

The light fitting is certified ATEX for the environment: 

  • II 3G Ex ec IIC T6 Gc
  • II 3D Ex tc IIIC T85°C Dc IP66

The basic requirements for safety and health protection are secured by the verification of conformity with the standards according to ČSN EN 60079-15, ČSN EN 60079-0 and ČSN EN 60079-31.

The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resistance against deformation and impact.

(It is necessary to consider exhalation in the air reducing the usability of the plastic at installations in an aggressive environment).


Advantages

  • Light fitting protection: IP66
  • Maximum ambient temperature: 0°≤Ta≤+50° (version with emergency back-up source for 1 or 3 hours; M1h, M3h)
  • Maximum ambient temperature: -25°≤Ta≤+55°
  • Lifetime: 50,000 hours / L90B10
  • Standard model - CRI > 80: 4000 K
  • Maximum system efficacy: 141 lm/W
  • The watt and lumen values can, in accordance with valid standards, vary by ± 7,5 %
  • Certification ATEX: AR19ATEX004
  • Certification M1h, M3h: ATEX AR19ATEX047
  • Terminal block: screwless, five-pole (version 1.4ft and 1.5ft), three-pole incl. earthing tape & screw for a perfect connection (basic version)


Materials / finishes

  • Ventilation plug steel, size M12 × 1,5 ATEX (for version with emergency back-up source M1h, M3h)
  • Diffuser: translucent polycarbonate (PC), UV stable, impact-resistant
  • Body: grey polycarbonate (PC), UV stable, impact-resistant
  • Reflector: steel sheet, white colour (RAL 9003)
  • Clips: stainless steel + polyamide + 15 % glass fibre
  • Cable glands: screwed M20 × 1,5 ATEX
  • Distance part: polyamide + 10 % glass fibre, it is used for reflector attachment during assembly


Electric equipment

  • LED modules, current driver, halogen-free wires with higher temperature resistance


Attachment method

  • Attachment with the use of side hangers to the wall
  • Directly to a ceiling or a wall with the use of screws and stainless brackets
  • Suspension with the use of stainless hooks


Installation

  • Package contains stainless hooks and stainless brackets


Share by: